E. Pilo (2003), Diseño óptimo de la electrificación de ferrocarriles de alta velocidad. Universidad Pontificia Comillas. Madrid (Spain).
  

J.R. Jiménez-Octavio (2009), Análisis dinámico y optimización de catenarias para alta velocidad. Universidad Pontificia Comillas. Madrid (Spain).
  

E. Pilo, L. Rouco, A. Fernández-Cardador, L. Abrahamsson, "A mono-voltage equivalent model of bi-voltage autotransformer-based electrical systems in railways", IEEE Transactions on Power Delivery. vol. 27, no. 2, pp. 699-708, April 2012.
      JCR impact factor 1.353 (2011)

R. Santodomingo, J.A. Rodríguez-Mondéjar, E. Pilo, "Caso práctico de representación de una instalación eléctrica en CIM", Anales de Mecánica y Electricidad. vol. LXXXVII, no. II, pp. 17-24, March 2010.
     

R. Santodomingo, J.A. Rodríguez-Mondéjar, E. Pilo, "Introducción al modelo CIM de los sistemas de energía eléctrica", Anales de Mecánica y Electricidad. vol. LXXXVI, no. V, pp. 31-38, September 2009.
     

E. Pilo, "El diseño de la electrificación y su impacto en la eficiencia energética del ferrocarril", Tecnirail Ferrocarril & Empresa. no. 78, pp. 18-19, May 2009.
  

J.R. Jiménez-Octavio, E. Pilo, "Optimal design of power supply systems using genetic algorithms", WIT Transactions on The Built Environment. vol. 103, pp. 391-400, September 2008.
  

R. Santodomingo, E. Pilo, J.A. Rodríguez-Mondéjar, M.A. García-Vaquero, "Adapting the CIM model to describe electrified railway systems", WIT Transactions on The Built Environment. vol. 103, pp. 381-390, September 2008.
  

J.R. Jiménez-Octavio, O. López-García, E. Pilo, A. Carnicero, "Coupled electromechanical optimization of power transmission lines", CMES: Computer Modeling in Engineering & Sciences. vol. 25, no. 2, pp. 81-97, February 2008.
      JCR impact factor 1.123 (2011)

A.P. Cucala, A. Fernández-Cardador, F. de Cuadra, E. Pilo, "An optimisation-based traffic regulator for metro lines", WIT Transactions on The Built Environment. vol. 96, pp. 439-448, September 2007.
  

E. Pilo, L. Rouco, A. Fernández-Cardador, "Catenary and autotransformer coupled optimization for 2x25kV systems planning", WIT Transactions on The Built Environment. vol. 88, pp. 747-757, July 2006.
   10.2495/CR060731    

J. Muñoz, E. Pilo, A. Fernández-Cardador, A.P. Cucala, "A mixed AC/DC model for railways' power systems", WIT Transactions on The Built Environment. vol. 88, pp. 805-815, July 2006.
   10.2495/CR060791    

E. Pilo, "La optimización del diseño de la electrificación de ferrocarriles", Tecnirail Ferrocarril & Empresa. no. 47, pp. 20-0, May 2006.
  

E. Pilo, L. Rouco, A. Hernández, "SILVIA: Una herramienta de ayuda al diseño de la electricificación de trenes de alta velocidad", Anales de Mecánica y Electricidad. vol. LXXIX, no. VI, pp. 8-16, November 2002.
     

A.J. López López, R.R. Pecharromán, E. Pilo, A.P. Cucala, A. Fernández-Cardador, "Analysis of energy-saving strategies in railway power supply systems", 9th World Congress on Railway Research - WCRR 2011. Lille, France, 22-26 May 2011
  

E. Pilo, R.R. Pecharromán, A.J. López López, "Stochastic traffic generator for Montecarlo load flow simulation", 12th International Conference on Computer System Design and Operation in the Railway and other Transit Systems. COMPRAIL 2010. Beijing, China, 31 August - 2 September 2010
  

J.R. Jiménez-Octavio, E. Pilo, "Optimal design of power supply systems using genetic algorithms", XI International Conference on Computer System Design and Operation in the Railway and Other Transit Systems - COMPRAIL2008. Universidad Castilla-La Mancha. ISBN: 9781845641269. Toledo, Spain, 15-17 September 2008
  

R. Santodomingo, E. Pilo, J.A. Rodríguez-Mondéjar, M.A. García-Vaquero, "Adapting the CIM model to describe electrified railway systems", XI International Conference on Computer System Design and Operation in the Railway and Other Transit Systems - COMPRAIL2008. Universidad Castilla-La Mancha. ISBN: 9781845641269. Toledo, Spain, 15-17 September 2008
  

E. Pilo, "El proyecto ElecRail", II Jornadas Estrategias de Ahorro y Eficiencia Energética en el Transporte Ferroviario. Sitges, Barcelona, Spain, 5-6 June 2008
  

E. Pilo, L. Rouco, A. Fernández-Cardador, "A multi-criteria approach to the analysis of modified 2x25kV bi-voltage systems using higher negative voltages", 8th World Congress on Railway Research. Seul, Korea, 18-22 May 2008
  

E. Pilo, "The development of the electrification as a dependable fuel solution", Future Fuels Rail Traction 2008. Londres, United Kingdom, 22-23 January 2008
  

A.P. Cucala, A. Fernández-Cardador, F. de Cuadra, E. Pilo, "An optimisation-based traffic regulator for metro lines", Urban Transport International Conference. Coimbra, Portugal, 3-5 September 2007
  

E. Pilo, L. Rouco, A. Fernández-Cardador, "An optimization procedure to determine the topology of ac railways power supply networks", 2007 ASME/IEEE Joint Rail Conference & Internal Combustion Engine Spring Technical Conference (JRCICE2007). ISBN: 0-7918-3795-5. Pueblo, Colorado, U.S.A., 13-16 March 2007
  

J.R. Jiménez-Octavio, E. Pilo, I. Egido, A. Carnicero, "New transformer sizing criteria based on moving average techniques for railway systems", 2007 ASME/IEEE Joint Rail Conference & Internal Combustion Engine Spring Technical Conference (JRCICE2007). ISBN: 0-7918-3795-5. ISBN: 0-7918-3795-5, Pueblo, Colorado, U.S.A., 13-16 March 2007
  

J. Muñoz, E. Pilo, A. Fernández-Cardador, A.P. Cucala, "A mixed AC/DC model for railways’ power systems", 10th International Conf. on Computer System Design and Operation in the Railway and Other Transit Systems (COMPRAIL 2006). pp.805-815. ISBN:1-84564-177-9.. Praga, Czech Republic, 10-12 July 2006
  

E. Pilo, L. Rouco, A. Fernández-Cardador, "Catenary and autotransformer coupled optimization for 2x25kV systems planning", 10th International Conf. on Computer System Design and peration in the Railway and Other Transit Systems (COMPRAIL 2006). pp.747-756. ISBN:1-84564-177-9.. Praga, Czech Republic, 10-12 July 2006
  

J.R. Jiménez-Octavio, E. Pilo, O. López-García, A. Carnicero, "Coupled electromechanical cost optimization of high speed railway overheads", 2006 Joint Rail Conference. ISBN: 0-7918-4203-7. Atlanta, Georgia, U.S.A., 4-6 April 2006
  

E. Pilo, "Diseño del sistema de alimentación eléctrica", Jornadas Técnicas "Estrategias de ahorro y eficiencia energética en el transporte ferroviario". Fundación de Ferrocarriles Españoles. Madrid, Spain, 14-15 March 2006
  

J. Muñoz, E. Pilo, A. Fernández-Cardador, A.P. Cucala, "Asignación de consumos a subestaciones de tracción", 9º Jornadas Hispano-lusas de Ingeniería Eléctrica. Marbella, Málaga, Spain, 30 June-2 July 2005
  

E. Pilo, L. Rouco, A. Fernández-Cardador, "A reduced representation of 2x25 kV electrical systems for high-speed railways", IEEE/ASME Joint Rail Conference 2003. ISBN: 0-7803-7741-9, Chicago, U.S.A., 22-24 April 2003
  

E. Pilo, L. Rouco, A. Fernández-Cardador, "Cálculo de tensiones de paso y de contacto en ferrocarriles de alta velocidad", 7as Jornadas Hispano-Lusas de ingenieria eléctrica. Vol. IV, pp. 27- 32. ISBN: 84-95821-00-1, Madrid, Spain, 4-6 Julio 2001
  

P. Linares, E. Pilo, L. Rouco, P. Romera, P. Sánchez, J. Alarcón, J. Lastra, I. Ribera, J.P. Fernández, A. García, "Analysis of the role of railway infrastructure managers within liberalised electricity markets. The case of GIF in Spain", International Conference on "Railway Traction Systems". Capri, Italy, 15-17 May 2001
  

E. Pilo, L. Rouco, A. Fernández-Cardador, A. Hernández-Velilla, "A Simulation Tool for the Design of the Electrical Supply System of High-Speed Railway Lines", 2000 IEEE/PES Summer Meeting. Pp. 1053-1058. ISBN: 0-7803-6420-1, Seattle, Washington, U.S.A., 16-20 July 2000
  

E. Pilo, L. Rouco, A. Fernández-Cardador, A. Hernández, "SILVIA: Una herramienta de ayuda al diseño de la electricificación de trenes de alta velocidad", 6ª Jornadas Hispano-Lusas de Ingeniería Eléctrica. ISBN: 84-920984-2-2, Lisboa, Portugal, 7-9 July 1999
  

E. Pilo, L. Rouco, A. Fernández-Cardador, "Catenary and autotransformer coupled optimization for 2x25kV systems planning", en Power Supply, Energy Management and Catenary Problems. Editores Pilo de la Fuente, E.. Ed. WIT Press. Southampton, U.K., 2010.
  

J.R. Jiménez-Octavio, E. Pilo, "Optimal design of power supply systems using genetic algorithms", en Power Supply, Energy Management and Catenary Problems. Editores Pilo de la Fuente, E.. Ed. WIT Press. Southampton, U.K., 2010.
  

E. Pilo, Power Supply, Energy Management and Catenary Problems. Editores Pilo de la Fuente, E.. Ed. WIT Press. Southampton, U.K., 2010.
  

A. García, E. Pilo, A. Fernández-Cardador, A.P. Cucala, "Planteamientos energéticos en el transporte", en El Ingeniero del ICAI y el desarrollo sostenible. Editores Sancha Gonzalo, J.L. et al.. Ed. Asociación Nacional de Ingenieros del ICAI. Madrid, Spain, 2009.
  

A. Fernández-Cardador, A.P. Cucala, A. García, E. Pilo, "Transporte ferroviario", en El Ingeniero del ICAI y el desarrollo sostenible. Editores Sancha Gonzalo, J.L. et al.. Ed. Asociación Nacional de Ingenieros del ICAI. Madrid, Spain, 2009.
  

Maintenance and new capabilities for Viesgo Tools 2009 a 2010, developed for: Eon España. Mar/2009-Mar/2011
  

Energetic sizing study of the railway sections Orense-Santiago and Robla-Pola de Lena , developed for: Auding Consultoría e Ingeniería. Mar/2009-Apr/2009
  

Development of a DC electrification simulation tool to identify capacity limitations, developed for: Fundación de los Ferrocarriles Españoles. Dec/2008-Feb/2009
  

Simulation and control of dual voltage (25 kV ac and 3kV dc) railway catenaries, developed for: SEMI (Sociedad Española de Montajes Industriales). Jul/2008-Jun/2009
  

Electrical parameters of the 220kV evacuation electric of the combined cycle power plant Lantarón (Gas Natural), developed for: Elecnor. Jun/2008-Jun/2008
  

Electrical parameters of the 220kV evacuation electric of the combined cycle power plant Lantarón (Gas Natural). Re-design, developed for: Elecnor. Jun/2008-Jun/2008
  

Electrical parameters of the 400kV evacuation electric of the combined cycle power plant Compostilla (Endesa), developed for: Elecnor. Jun/2008-Jun/2008
  

Assessment of the Maglev train of AMT, developed for: SEMI (Sociedad Española de Montajes Industriales). Jun/2008-Sep/2008
  

Analysis of the Chilean Network 2008 for the CNE, using the IIT Network Reference Model, developed for: SYNEX Ingenieros Consultores Ltda.. Jun/2008-Oct/2008
  

Maintenance and new capabilities for Viesgo Tools 2008, developed for: Viesgo. May/2008-Nov/2008
  

Electrical parameters of the 220kV evacuation electric of the combined cycle power plant Málaga (Gas Natural), developed for: Elecnor. Apr/2008-Apr/2008
  

Analysis of energy consumption on metropolitan railways, commuter railways and high speed lines, developed for: Ministerio de Fomento (CEDEX). Dec/2007-Mar/2010
  

Control center requirements of high-speed railway power system, developed for: ADIF. Dec/2007-Dec/2010
  

Harmonization of CIM and IEC 61850 models within the Framework DENISE (Intelligent, Secure and Efficient distribution of electricity), developed for: Everis. Oct/2007-Mar/2009
  

Update of the tool SILVIA for the design of the electrification of high-speed railways, developed for: Cosemel Ingeniería. Apr/2007-Jun/2007
  

Feasibility study of 2 x 3000 V (dc) system for Adif, developed for: Sener. Apr/2007-May/2007
  

New capabilities for Viesgo Tools 2007, developed for: Viesgo. Apr/2007-May/2008
  

Technical revision of a development proposal of unbalanced three phase load flow for distribution networks, developed for: Eliop. Feb/2007-Jun/2007
  

Neutral zone supervision and control requirements of railway power system, developed for: ADIF. Dec/2006-Dec/2008
  

Interconnection control center requirements of railway power system, developed for: ADIF. Dec/2006-Dec/2008
  

Development of a model for calculating and predicting the transport system’s energy consumptions and emissions, with a view to assessing the effect of infrastructure investment and transport policy decisions on these consumptions, developed for: CEDEX. Dec/2006-Nov/2008
  

Lightning protection of sobstations with Franklin rods, developed for: Unión Fenosa Distribución. Dec/2006-Mar/2007
  

New capabilities for Viesgo Tools 2006, developed for: Viesgo. Apr/2006-Mar/2007
  

Transfer of the NHONE tool to W2M, developed for: GAMESA (W2M). Feb/2005-May/2005
  

Computation of the wear of the overhead system of high speed railways, developed for: Ministerio de Educación y Ciencia. Dec/2004-Dec/2007
  

Development of a optimization tool for advanced electro-mechanical design of high-speed catenary configurations, developed for: SEMI (Sociedad Española de Montajes Industriales). Jul/2004-Jul/2004
  

Train consumption estimation and assignation for the energy invoicing system of RENFE, developed for: Indra. May/2004-May/2007
  

Short circuit study on the power supply system of the high speed railway line Madrid-Valladolid, developed for: Iberdrola Ingeniería y Consultoría. Mar/2004-Apr/2004
  

Reduction of voltage drops in the catenary of high speed railways with kinetic energy storage systems, developed for: CEDEX. Mar/2004-May/2004
  

Current distribution in the droppers of the C-350 catenary of high speed railways, developed for: Euroasce. Mar/2004-Mar/2004
  

Wind energy management in the spanish electricity market, developed for: Gamesa Energías Renovables S.A.- Sociedad Unipersonal. Jul/2003-Jun/2004
  

Optimization of the electrical and mechanical design of the catenaries of high speed trains, developed for: Ministerio de Fomento. Jan/2003-Dec/2005
  

Power plant studies of the Son Reus combined cycle thermal plant, developed for: Duro Felguera Energía. Oct/2002-Nov/2002
  

Power plant studies of the Barranco de Tirajana combined cycle thermal plant, developed for: Duro Felguera Energía. Oct/2002-Nov/2002
  

Unbalances due to the connection of a traction substation of the Madrid-Barcelona high speed line at the 220 kV busbar of the Villaverde substation, developed for: Iberdrola Distribución. Jul/2002-Jul/2002
  

Specification and development of a prototype tool for the estimation of the electricity supply requirements and optimization of its economic management for a high-speed railway, developed for: Fundación de los Ferrocarriles Españoles. Feb/2001-Aug/2001
  

Maintenance of the computer programs for mechanical and electrical design of high-speed train catenaries, developed for: SEMI (Sociedad Española de Montajes Industriales). Jul/2000-Jun/2001
  

Analysis of the position of a Railway Infrastructure Management Company in the new regulatory framework of the electric power system in Spain. Application to the high speed line Madrid-Barcelona-French border, developed for: Gestor de Infraestructuras Ferroviarias (GIF). Sep/1999-Jun/2000
  

Mechanical and Electrical Design of the Catenary of a High-Speed Train, developed for: SEMI (Sociedad Española de Montajes Industriales). Jan/1998-Sep/1999