Ph.D. Thesis Developed:
1 Ph.D. thesis
Journal Publications
A. Rodriguez, P. Frías, J. Reneses, C. Mateo, L. del Río, S. Bañales, "Mejora de la calidad del suministro eléctrico mediante centros de transformación inteligentes", Anales de Mecánica y Electricidad. vol. LXXXVIV, no. III, pp. 11-17, August 2012.
P. Frías, C. Mateo, I.J. Pérez-Arriaga, "Evaluación del impacto de la integración del coche eléctrico en las redes de distribución de energía eléctrica", Lychnos. Cuadernos de la Fundación General CSIC. no. 6, pp. 56-61, September 2011.
R. Cossent, L. Olmos, T. Gómez, C. Mateo, P. Frías, "Distribution network costs under different penetration levels of distributed generation", European Transactions on Electrical Power. vol. 21, no. 6, pp. 1869-1888, September 2011.
T. Gómez, C. Mateo, A. Sánchez, J. Reneses, M. Rivier, "La retribución de la distribución de electricidad en España y el modelo de red de referencia", Estudios de Economía Aplicada. vol. 29, no. 2, pp. 661-(24 pág), August 2011.
C. Mateo, T. Gómez, A. Sánchez, J. Peco, A. Candela, "A reference network model for large-scale distribution planning with automatic street map generation", IEEE Transactions on Power Systems. vol. 26, no. 1, pp. 190-197, February 2011.
L. Pieltain, T. Gómez, R. Cossent, C. Mateo, P. Frías, "Assessment of the impact of plug-in electric vehicles on distribution networks", IEEE Transactions on Power Systems. vol. 26, no. 1, pp. 206-213, February 2011.
C. Mateo, F.M. De Espinosa, Y. Gómez-Ullate, J.A. Talavera, "Experimental validation of ultrasonic guided modes in electrical cables by optical interferometry", IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control. vol. 55, no. 3, pp. 629-636, March 2008.
C. Mateo, J.A. Talavera, A. Muñoz, "Elastic guided wave propagation in electrical cables", IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control. vol. 54, no. 7, pp. 1423-1429, July 2007.
O. López-García, A. Carnicero, R. Ruiz, J.A. Talavera, C. Mateo, "Development of a current sensor based on active materials for high-voltage transmission systems", Smart Materials and Structures. vol. 15, no. 1, pp. 563-570, February 2006.
J.A. Talavera, C. Mateo, "Redes de energía eléctrica y comunicaciones basadas en la propagación de ondas elásticas", Anales de Mecánica y Electricidad. vol. LXXXII, no. IV, pp. 10-17, July 2005.
C. Mateo, J.A. Talavera, "Los sistemas eléctricos ante un nuevo cambio. El impacto de la norma CEI 61850", Anales de Mecánica y Electricidad. vol. LXXXI, no. II, pp. 43-49, April 2004. 11 publications
Conference Papers
A. Rodriguez, P. Frías, J. Reneses, C. Mateo, "Optimal degree of smart transformer substations in distribution networks for reliability improvement", 3rd IEEE PES Innovative Smart Grid Technologies (ISGT) Europe Conference. Berlin, Germany, 14-17 October 2012
I. Momber, T. Gómez, M. Rivier, C. Mateo, "Benefits of EV supplier-aggregators and distribution system operators from applying smart charging of plug-in electric vehicles", Cigrè International Symposium on The Electric Power System of the Future: Integrating Supergrids and Microgrids. Bolonia, Italy, 13-15 September 2011
L. González, C. Mateo, T. Gómez, J. Reneses, M. Rivier, A. Sánchez, "Assessing the impact of distributed generation on energy losses using reference network models", Cigrè International Symposium on The Electric Power System of the Future: Integrating Supergrids and Microgrids. Bolonia, Italy, 13-15 September 2011
C. Mateo, T. Gómez, A. Sánchez, A. Candela, L. Maqueda Hernando, "Large-scale planning models to assess economies of scale in distribution grids in the presence of distributed generation", 17th Power Systems Computation Conference - PSCC'11. Estocolmo, Sweden, 22-26 August 2011
R. Cossent, L. Olmos, T. Gómez, C. Mateo, P. Frías, "Mitigating the impact of distributed generation on distribution network costs through advanced response options", 7th Conference on the European Energy Market - EEM10. ISBN: 978-1-4244-6838-6, Madrid, Spain, 23-25 June 2010
R. Cossent, T. Gómez, L. Olmos, C. Mateo, P. Frías, "Assessing the impact of distributed generation on distribution network costs", 6th International Conference on the European Energy Market - EEM'09. pp. 586-593, Leuven, Belgium, 27-29 May 2009
J.A. Talavera, A. Carnicero, O. López-García, C. Mateo, R. Ruiz, "Electrical current measurement based on elastic waves propagation through dielectric materials", UPEC 2004 University of the West of England (UWE). Bristol, United Kingdom, 6-8 September 2004
7 publications
Books and Book chapters
T. Gómez, C. Mateo, A. Sánchez, P. Frías, R. Cossent, "Reference network models: a computational tool for planning and designing large-scale smart electricity distribution grids", en High Performance Computing in Power and Energy Systems. Editores Siddhartha Kumar Khaitan and Anshul Gupta. Ed. Springer. Berlín, Germany, 2012.
M. Rivier, I.J. Pérez-Arriaga, P. García-González, T. Gómez, L. González, C. Mateo, L. Olmos, A. García-Cerrada, "El papel de la electricidad en el futuro modelo energético", en El Ingeniero del ICAI y el desarrollo sostenible. Editores Sancha Gonzalo, J.L. et al.. Ed. Asociación Nacional de Ingenieros del ICAI. Madrid, Spain, 2009.
2 books
Projects
SUSTAINABLE: Smart distribution system operation for maximizing the integration of renewable generation, developed for: Comisión Europea.
Jan/2013-Dec/2015
Virtual Traffic Solver: Representation and simulation tool for road accidents, developed for: ARSINTON DIGITAL S.L.
Dec/2012-Dec/2013
, developed for: SYNEX Ingenieros Consultores Ltda.
Jun/2012-Oct/2012
PV GRID: Reducing barriers hampering large-scale integration of PV electricity into the distribution GRID, developed for: Comisión Europea.
May/2012-Nov/2014
Cost-benefit assessment of technology solutions in the context of smart electricity distribution grids, developed for: ORMAZABAL Corporate Technology.
Feb/2011-Jan/2012
Support, maintenance and new developments of the Reference Network Models of the Spanish Electricty System, developed for: Comisión Nacional de la Energía.
Jan/2011-Dec/2011
Improvements, maintenance and support on the use of the Distribution Network Reference Models of the Spanish National Electricity System, developed for: Comisión Nacional de la Energía.
Jan/2010-Dec/2010
MERGE - Mobile Energy Resources in Grids of Electricity, developed for: European Commission.
Jan/2010-Dec/2011
Optimal integration of distributed energy resources, developed for: Ministerio de Ciencia e Innovación.
Oct/2009-Dec/2010
Implementing and testing software protection mechanisms based on USB security keys, developed for: Socoin ingeniería y construcciones industriales.
Mar/2009-Mar/2009
Support and maintenance in the use of the Network Reference Models of the National Electricity System, developed for: Comisión Nacional de la Energía (CNE).
Nov/2008-Nov/2009
A review of the 58/2007 Act (10th April, Extremadura), developed for: Iberdrola Distribución.
Nov/2008-Nov/2008
SUSPLAN: Development of regional and Pan-European guidelines for more efficient integration of renewable energy into future infrastructure, developed for: Comisión Europea.
Sep/2008-Aug/2011
Analysis of the Chilean Network 2008 for the CNE, using the IIT Network Reference Model, developed for: SYNEX Ingenieros Consultores Ltda..
Jun/2008-Oct/2008
Division of the network costs into an energy charge and a demand charge: methodology and computation, developed for: Comisión Nacional de Energía (CNE).
May/2008-Jul/2008
Analysis of Chilectra\'s network using the IIT Network Reference Model, developed for: Systep Ingeniería y Diseños Ltd.
Apr/2008-Nov/2008
Support and maintenance in the use of the Network Reference Models of the National Electricity System, developed for: Comisión Nacional de la Energía (CNE).
Nov/2007-Oct/2008
Development of models for estimating the quality of an intelligent distribution network, developed for: Eliop.
Sep/2007-Dec/2009
Improvement of the Social Optimal Outcome of Market Integration of DG/RES in European Electricity Markets, developed for: Comisión Europea.
Sep/2007-Feb/2010
Simulation models for intelligent electricity distribution networks, developed for: Everis.
Jun/2007-Sep/2009
Models of elastic waves propagation through electrical cables, developed for: Ministerio de Educación y Ciencia.
Dec/2005-Dec/2006
SISCANT II - Development and certification of advanced systems of control for UAV (Unmanned Aerial Vehicles), developed for: Ministerio de Industria, Turismo y Comercio.
Dec/2005-Jun/2008
The development of a network reference model for the Spanish Electric Power System, developed for: Unesa, ASEME, CIDE, APYDE.
Jun/2004-Dec/2005
IELAS Electrical current measurement based on elastic waves propagation in dielectric materials, developed for: Comisión Europea.
Sep/2001-Oct/2005
24 projects
Generate CV in Comillas/CICYT format |
|
Mailing Address: C/ Alberto Aguilera 23, 28015 Madrid, Spain
Building SM26: C/ Santa Cruz de Marcenado 26, 28015 Madrid, Spain MAP Building FR3: C/ Francisco de Ricci 3, 28015 Madrid, Spain MAP |