A. Carnicero (1999), Evaluación de la vulnerabilidad y recondicionamiento sismico de puentes. Universidad Pontificia Comillas. Madrid (Spain).
  

J.R. Jiménez-Octavio (2009), Análisis dinámico y optimización de catenarias para alta velocidad. Universidad Pontificia Comillas. Madrid (Spain).
  

A. Cantizano (2003), Simulación numérica de mapas de mecanismos de desgaste. Universidad Pontificia Comillas. Madrid (Spain).
  

M. Sáenz (2002), Deformaciones nanométricas de interés en metrología de defectos de forma. Universidad Pontificia Comillas. Madrid (Spain).
  

A. Carnicero, J.R. Jiménez-Octavio, C. Sanchez-Rebollo, A. Ramos, M. Such, "Influence of track irregularities in the catenary-pantograph dynamic interaction", Journal of Computational and Nonlinear Dynamics. vol. 7, no. 4, pp. 41015-1-41015-6, October 2012.
      10.1115/1.4006735     JCR impact factor 0.827 (2011)

A. Carnicero, J.R. Jiménez-Octavio, C. Sanchez-Rebollo, "Simulation of the catenary - pantograph dynamic interaction", Tecnirail Ferrocarril & Empresa. no. 102, pp. 26-27, June 2012.
  

M. Such, J.R. Jiménez-Octavio, A. Carnicero, O. López-García, "An approach based on the catenary equation to deal with static analysis of three dimensional cable structures", Engineering Structures. vol. 31, no. 9, pp. 2162-2170, September 2009.
      10.1016/j.engstruct.2009.03.018     JCR impact factor 1.351 (2011)

J. Munilla, M. Castro, A. Carnicero, "Surface effects in atomistic mechanical simulations of Al nanocrystals", Physical Review B. vol. 80, no. 2, pp. 24109.1-24109.9, July 2009.
      10.1103/PhysRevB.80.024109     JCR impact factor 3.691 (2011)

M. Such, J.R. Jiménez-Octavio, A. Carnicero, O. López-García, "Modelado de estructuras de cables", Anales de Mecánica y Electricidad. vol. LXXXV, no. IV, pp. 22-27, July 2008.
     

O. López-García, A. Carnicero, V. Torres, J.R. Jiménez-Octavio, "The influence of cable slackening on the stiffness computation of railway overheads", International Journal of Mechanical Sciences . vol. 50, no. 7, pp. 1213-1223, July 2008.
      JCR impact factor 1.231 (2011)

J.R. Jiménez-Octavio, O. López-García, E. Pilo, A. Carnicero, "Coupled electromechanical optimization of power transmission lines", CMES: Computer Modeling in Engineering & Sciences. vol. 25, no. 2, pp. 81-97, February 2008.
      JCR impact factor 1.123 (2011)

O. López-García, A. Carnicero, J.L. Maroño, "Influence of stiffness and contact modelling on catenary–pantograph system dynamics", Journal of Sound and Vibration. vol. 299, no. 4-5, pp. 806-821, February 2007.
      JCR impact factor 1.588 (2011)

A. Carnicero, J.R. Jiménez-Octavio, O. López-García, "Técnicas computacionales aplicadas al estudio del sistema de captación de energía en sistemas ferroviarios ", Anales de Mecánica y Electricidad. vol. LXXXIV , no. I, pp. 40-47, January 2007.
     

J.L. Maroño, A. Carnicero, O. López-García, "Modelo simplificado para la simulación de la interacción dinámica catenaria - pantógrafo", Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería . vol. 23, no. 1, pp. 15-33, January 2007.
     

O. López-García, A. Carnicero, V. Torres, "Computation of the initial equilibrium of railway overheads based on the catenary equation", Engineering Structures. vol. 28, no. 10, pp. 1387-1394, August 2006.
      10.1016/j.engstruct.2006.01.007     JCR impact factor 1.351 (2011)

A. Carnicero, O. López-García, J.L. Maroño, "Modelo simplificado de la interacción dinámica catenaria-pantógrafo", Anales de Mecánica y Electricidad. vol. LXXXIII, no. III, pp. 30-35, May 2006.
     

O. López-García, A. Carnicero, R. Ruiz, J.A. Talavera, C. Mateo, "Development of a current sensor based on active materials for high-voltage transmission systems", Smart Materials and Structures. vol. 15, no. 1, pp. 563-570, February 2006.
      10.1088/0964-1726/15/2/039     JCR impact factor 2.089 (2011)

V. Torres, A. Carnicero, O. López-García, "Un modelo para el cálculo de catenarias ferroviarias", Anales de Mecánica y Electricidad. vol. LXXXI, no. II, pp. 50-54, March 2004.
     

R. Ruiz, A. Carnicero, O. López-García, "Materiales inteligentes (II): aplicaciones tecnológicas", Anales de Mecánica y Electricidad. vol. LXXXI, no. I, pp. 16-21, January 2004.
     

R. Ruiz, A. Carnicero, O. López-García, "Materiales inteligentes I/II: introducción a los materiales del siglo XXI", Anales de Mecánica y Electricidad. vol. LXXX, no. VI, pp. 40-46, November 2003.
     

J.L. Galindo, A. Carnicero, "Optimización mediante algoritmos genéticos: Aplicación al diseño de celosías", Anales de Mecánica y Electricidad. vol. LXXX, no. V, pp. 40-50, September 2003.
     

A. Cantizano, A. Carnicero, "Numerical simulation of wear-mechanism maps", Computational Materials Science. vol. 25, no. 1-2, pp. 54-60, September 2002.
      JCR impact factor 1.574 (2011)

A. Carnicero, R. Perera, E. Alarcón, "Modelo simplificado de daño por fatiga para hormigón armado", Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería . vol. 17, no. 1, pp. 83-98, January 2001.
     

R. Perera, A. Carnicero, E. Alarcón, "A fatigue damage model for seismic response of RC structures", Computers & Structures. vol. 78, no. 1-3, pp. 293-302, January 2000.
      JCR impact factor 1.874 (2011)

A. Carnicero, R. Perera, E. Alarcón, "Simplified model of low cycle fatigue for RC frames discussion", Journal of Structural Engineering-Asce. vol. 125, no. 10, pp. 1200-1202, October 1999.
      JCR impact factor 0.955 (2011)

A. Carnicero, J.R. Jiménez-Octavio, M. Such, A. Ramos, C. Sanchez-Rebollo, "Influence of statics and dynamics on high performance catenary designs", International Conference on Pantograph Catenary Interaction Framework for Intelligent Control - PACIFIC 2011. Amiens, France, 8 December 2011
  

J.R. Jiménez-Octavio, M. Such, A. Carnicero, C. Sanchez-Rebollo, "A moving mesh FEM applied to the dynamic interaction catenary-pantograph", 9th World Congress on Railway Research - WCRR 2011. Lille, France, 22-26 May 2011
  

C. Sanchez-Rebollo, A. Carnicero, J.R. Jiménez-Octavio, M. Such, "Influence of wind effects on the catenary cable system behavior", 9th World Congress on Railway Research - WCRR 2011. Lille, France, 22-26 May 2011
  

A. Ramos, J.R. Jiménez-Octavio, M. Such, A. Carnicero, C. Sanchez-Rebollo, "Dynamic simulation of the system pantograph-catenary-vehicle-track", 9th World Congress on Railway Research - WCRR 2011. Lille, France, 22-26 May 2011
  

J.R. Jiménez-Octavio, A. Carnicero, M. Such, A. Ramos, C. Sanchez-Rebollo, "Modelos de simulación dinámica catenaria-pantógrafo", VII International RailForum. Valencia, Spain, 25-27 May 2010
  

A. Ramos, J.R. Jiménez-Octavio, M. Such, A. Carnicero, C. Sanchez-Rebollo, "Simulation models of catenary-pantograph dynamic interaction. Validation and applications", Workshop on Power transmission in High Speed Railways Systems. Amiens, France, 4-6 December 2009
  

A. Ramos, J.R. Jiménez-Octavio, M. Such, A. Carnicero, O. López-García, "Simulación dinámica del conjunto catenaria-pantógrafo-vehículo-plataforma", Métodos Numéricos en Ingeniería 2009. ISBN: 978-84-96736-66-5, pp. 112, Barcelona, Spain, 29 June - 2 July 2009
  

J.R. Jiménez-Octavio, M. Such, A. Carnicero, O. López-García, A. Ramos, "Modelos para la simulación de la interacción dinámica catenaria-pantógrafo", Métodos Numéricos en Ingeniería 2009. ISBN: 978-84-96736-66-5, pp. 111, Barcelona, Spain, 29 June - 2 July 2009
  

J.R. Jiménez-Octavio, M. Such, A. Carnicero, O. López-García, "Validation of simulation approaches for catenary-pantograph dynamics", Ninth International Conference on Computational Structures Technology. Atenas, Greece, 2-5 September 2008
  

J.R. Jiménez-Octavio, E. Pilo, I. Egido, A. Carnicero, "New transformer sizing criteria based on moving average techniques for railway systems", 2007 ASME/IEEE Joint Rail Conference & Internal Combustion Engine Spring Technical Conference (JRCICE2007). ISBN: 0-7918-3795-5. ISBN: 0-7918-3795-5, Pueblo, Colorado, U.S.A., 13-16 March 2007
  

A. Carnicero, O. López-García, V. Torres, J.R. Jiménez-Octavio, "An algorithm based on finite element method and catenary equation to compute the initial equilibrium of railway overhead", Eighth International Conference on Computational Structures Technology. ISBN-10 1-905088-08-6. Las Palmas de Gran Canaria, Spain, 12-15 September 2006
  

J.R. Jiménez-Octavio, E. Pilo, O. López-García, A. Carnicero, "Coupled electromechanical cost optimization of high speed railway overheads", 2006 Joint Rail Conference. ISBN: 0-7918-4203-7. Atlanta, Georgia, U.S.A., 4-6 April 2006
  

J.A. Talavera, A. Carnicero, O. López-García, C. Mateo, R. Ruiz, "Electrical current measurement based on elastic waves propagation through dielectric materials", UPEC 2004 University of the West of England (UWE). Bristol, United Kingdom, 6-8 September 2004
  

A. Cantizano, G. Zavarise, A. Carnicero, J. Pérez, "Numerical simulation of wear mecanics maps", 10th International Workshop on Computational Mechanics of Materials. Galway, Ireland, 31 August-1 September 2000
  

R. Perera, E. Alarcón, A. Carnicero, "Modeling of cumulative damage for reinforced concrete columns", 4th EUROMECH - Solid Mechanics Conference. Metz, France, 26-30 June 2000
  

R. Perera, E. Alarcón, A. Carnicero, "Modelization of low cycle fatigue damage in frames", 12th World Conference on Earthquake Engineering. Auckland, New Zealand, 30 January-4 February 2000
  

A. Carnicero, R. Perera, E. Alarcón, "Modelo simplificado para la evaluación de daño en elementos de hormigón armado", IV Congreso de Métodos Numéricos en Ingeniería. Sevilla, Spain, 7-10 June 1999
  

R. Perera, A. Carnicero, E. Alarcón, J. Flórez-López, "Modelización simplificada de la degradación en estructuras", 1er Congreso Nacional de Ingeniería Sísmica. Murcia, Spain, 12-16 April 1999
  

A. Carnicero, R. Perera, E. Alarcón, "A simplified model for evaluation of fatigue damage in frames", 11th European Conference on Earthquake Engineering. París, France, 6-11 September 1998
  

A. Carnicero, R. Perera, E. Alarcón, "Computational Models for Damage Assesment of Structures", Joint European Union / Japan Workshop on Seismic Risk. pp. 201-207. Chania, Crete, Greece, 24-26 Marzo 1998
  

A. Carnicero, R. Perera, S. Gómez, E. Alarcón, "A computer program for bridge retrofitting", Second International Conference on Behaviour of Steel Structures in Seismic Areas. Kyoto, Japan, 3-8 August 1997
  

A. Carnicero, J. Mateo, E. Alarcón, "La Normativa Española sobre ruido y vibraciones generadas por tráfico", II Simposium sobre Ingeniería del Transporte. Madrid, Spain, May 1996
  

A. Carnicero, J.R. Jiménez-Octavio, C. Sanchez-Rebollo, "Simulation and models of the catenary-pantograph dynamic interaction", en Issues on Mechanical and Civil Engineering. Ed. UPM Press. Madrid, Spain, 2013.
  

R. Perera, A. Carnicero, E. Alarcón, "A damage model for seismic retroffiting of structures", en Advances in Civil and Structural Engineering Computing for Practice. Ed. Civil-Comp Ltd.. Stirling, U.K., 1998.
  

A. Carnicero, R. Perera, E. Alarcón, "Computational models for damage assesment of structures", en Earthquake Strong Ground Motion Evaluation - Application for Earthquake Disaster Mitigation. Ed. European Commission. Directorate General XII for Science Research and Development. Bruselas, Belgium, 1998.
  

National network of mechanical engineering, developed for: Ministerio de Ciencia e Innovación. Jan/2011-Dec/2011
  

Fatigue analysis of the water supply nozzles, developed for: Iberdrola. Apr/2010-Dec/2010
  

Simulation of the wind effect on the catenary-pantograph interaction of high-speed trains, developed for: Ministerio de Ciencia e Innovación. Jan/2010-Dec/2012
  

, developed for: Ministerio de Ciencia e Innovación. Jan/2010-Dec/2010
  

Fatigue analysis of the water supply nozzles, developed for: Iberdrola. Jul/2009-Dec/2009
  

Development of an algorithm for geometric computation of aerial cables, developed for: Iberdrola Ingeniería y Construcción. Mar/2009-May/2009
  

Study on the design of the roof structure of silos, developed for: Symaga SA. Sep/2008-Dec/2008
  

Simulation and control of dual voltage (25 kV ac and 3kV dc) railway catenaries, developed for: SEMI (Sociedad Española de Montajes Industriales). Jul/2008-Jun/2009
  

Study of electrostatic fields in cable connection terminals , developed for: Unión Fenosa Distribución. Jun/2008-Sep/2008
  

Study of electrostatic fields in connection terminals transformer-cable, developed for: Unión Fenosa Distribución. Feb/2008-Jun/2008
  

Design of the active components of distribution power transformers of very low power losses and modelling of short circuit conditions , developed for: COTRADIS. Dec/2007-Dec/2009
  

Study of electrostatic fields in connection terminals transformer-cable, developed for: Unión Fenosa Distribución. May/2007-Jul/2007
  

Study of the C-350 catenary performance according the new Technical Specifications for Interoperability (TSIs), developed for: Cosemel Ingeniería. Apr/2007-Feb/2008
  

Study about the dynamic performance of the railway overhead CHV-3, developed for: Cosemel Ingeniería. Sep/2006-Nov/2006
  

Design of a structural element as an anticrashing member, developed for: Protec-Fire. Jul/2005-Jul/2005
  

Not available, developed for: Jufan, S.A.. Apr/2005-Apr/2005
  

Computation of the wear of the overhead system of high speed railways, developed for: Ministerio de Educación y Ciencia. Dec/2004-Dec/2007
  

Extrapolation of the compression test results over a steel box, developed for: SEPSA (Sistemas Electrónicos de Potencia). Sep/2004-Nov/2004
  

Development of a optimization tool for advanced electro-mechanical design of high-speed catenary configurations, developed for: SEMI (Sociedad Española de Montajes Industriales). Jul/2004-Jul/2004
  

Not available, developed for: Indra. Jul/2004-Jul/2004
  

Optimization of the electrical and mechanical design of the catenaries of high speed trains, developed for: Ministerio de Fomento. Jan/2003-Dec/2005
  

Seismic behavior of electric switch, developed for: ABB Power Technology. Sep/2001-Sep/2001
  

IELAS Electrical current measurement based on elastic waves propagation in dielectric materials, developed for: Comisión Europea. Sep/2001-Oct/2005
  

Automatic water elimination in diesel-fuel filters, developed for: Robert Bosch. Jun/2001-Dec/2001
  

Structural calculation of reactors for rubber pyrolisis, developed for: CIMEPA SA. Feb/2001-Mar/2001
  

Development of a computer model of the catenaries of overhead transmission lines, developed for: SEMI (Sociedad Española de Montajes Industriales). Feb/2001-May/2001
  

Maintenance of the computer programs for mechanical and electrical design of high-speed train catenaries, developed for: SEMI (Sociedad Española de Montajes Industriales). Jul/2000-Jun/2001
  

Vibration study of concrete moulds, developed for: Uniblock. Dec/1999-Jan/2000
  

Fatigue behaviour study of diesel filters., developed for: Robert Bosch. May/1999-Jul/1999